-190x190h.png "12-volt Motor Assembly for #8, #9, #9A")
-190x190h.png "#5T MinoSaver Aerator, 1/10HP Turbo")
-190x190h.jpg "#5T MinoSaver Aerator, 1/10HP Turbo")
-190x190h.png "#6A MinoSaver Aerator, 110-volt")
-190x190h.jpg "#8A 110 Volt Air-Jet Aerator")
-190x190h.png "#8A 110 Volt Air-Jet Aerator")
-190x190w.jpg "L-40 Grader Basket")
-190x190h.png "Flat Grader Panel")
All Products
Brand: MinoSaver
Model: #3
For use in 5 to 50 gallons of water. Will carry up to 2,000 minnows. Basket size: 8" height, 2.75" diameter.Not meant to be run continuous, less than 5 hours at a time...
$110.00
New
Brand: MinoSaver
Model: MS-PADDLE-3
This is a replacement part designed for Minnow-Saver #3 Agitator/Aerators...
$25.00
New
Model: MS-BASKET-4
This is a replacement part designed for Minnow-Saver #4 Agitator/Aerators. Rubber bearings included...
$42.00
Brand: MinoSaver
Model: MS-Blade4
Replacement #4 blade, also known as a paddle. Affix to the
appropriate #4 shaft to make a complete "prop and shaft". Designed for
the Minnow-Saver #4 Agitator/Aerator (110-volt)...
$15.00
New
Brand: MinoSaver
Model: MS-PADDLE-4
This is a replacement part designed for Minnow-Saver #4 Agitator/Aerators...
$25.00
New
New
Brand: MinoSaver
Model: MS-98349A
Replacement part designed for wrapping around an aerating chamber.
Compatible with Minnow-Saver #4, #9A Regular and #9A Special
Agitator/Aerators...
$8.00
New
New
Brand: MinoSaver
Model: MS-BASKET-5
This is a replacement part designed for Minnow-Saver #5 Agitator/Aerators. Rubber bearings included...
$49.00
Hot
Out Of Stock
Brand: MinoSaver
Model: #5
110Volt, 1.4 Amp- 1,550 rpm, 1/20 HP fan cooled thermal protected continuous motor. Sturdy
shockproof motor mount with brass shaft. 4-7/16" x 9-1/2" epoxy coated
basket. Made with galvanized hardware mesh. Hard rubber aerating chamber. For up to 250 gal tanks. Wt.: 9lbs.This is a new motor with ..
$252.00
Brand: MinoSaver
Model: MS-PADDLE-5
This is a replacement part designed for the Minnow-Saver #5
Agitator/Aerator (110-volt). This differs from the #5A paddle because
the bottom-end of the shaft does not have an insert for an impeller to
be attached...
$25.00
New
Brand: MinoSaver
Model: MS-Rubber-5
This is a replacement part for the Minnow-Saver #5 Agitator/Aerator...
$15.00
Brand: MinoSaver
Model: MS-Blade5-5A
Replacement #5/5A blade, also known as a paddle. Affix to the
appropriate #5/5A shaft to make a complete "prop and shaft". Designed
for the Minnow-Saver #5 and #5A Agitator/Aerator (110-volt)...
$15.00
New
Brand: MinoSaver
Model: MS-99255A
This is a replacement part for the Minnow-Saver #5 and #5A Agitator/Aerator (110-volt)...
$16.00
Out Of Stock
Brand: MinoSaver
Model: #5A
1550 R.P.M., 1/20 HP Fan cooled thermal protected continuous motor. Hard rubber aerating chamber. The pump delivers approximately 250 gallons per hour at 1 foot rise. The pump can be easily changed to another #5 agitator, when the old agitator is worn out. Ideal for water circulation, filtering, etc..
$290.00
Brand: MinoSaver
Model: MS9805COPPER
Replacement copper tube (set of 2) for the Minnow-Saver #5A Agitator/Aerator (110-volt)..
$20.00
Brand: MinoSaver
Model: MS-Impeller5A
Replacement item for the Minnow-Saver #5A Agitator/Aerator (110-volt)...
$25.00
New
Brand: MinoSaver
Model: MS-BASKET5A
This is a pump basket replacement part designed for the Minnow-Saver #5A Agitator/Aerators. Rubber bearings included...
$18.00
Brand: MinoSaver
Model: MS-PADDLE-5A
This is a replacement part designed for the Minnow-Saver #5A
Agitator/Aerator (110-volt). This differs from the #5 paddle because one
can attach an impeller to the bottom-end of the shaft...
$30.00
Brand: MinoSaver
Model: MS-9805AT
Replacement clear vinyl tube, approximately 9 in. long, for the Minnow-Saver #5A Agitator/Aerator (110-volt)...
$4.50
-250x250h.png "#5T MinoSaver Aerator, 1/10HP Turbo")
-250x250h.jpg "#5T MinoSaver Aerator, 1/10HP Turbo")
New
Out Of Stock
Brand: MinoSaver
Model: #5T
110Volt, 1.4 Amp- 1,550 rpm, 1/10 HP fan cooled thermal protected continuous motor. Sturdy
shockproof motor mount with brass shaft. 4-7/16" x 9-1/2" epoxy coated
basket. Made with galvanized hardware mesh. Hard rubber aerating chamber. For up to 250 gal tanks. Wt.: 9lbs.This is a new motor with ..
$268.00
New
Brand: MinoSaver
Model: MS-Rubber-6
This is a replacement part for the Minnow-Saver #6 Agitator/Aerator...
$15.00
New
Brand: MinoSaver
Model: MS-BASKET6A
This is a replacement part designed for Minnow-Saver #6A Agitator/Aerators. Rubber bearings included...
$42.00
-250x250h.png "#6A MinoSaver Aerator, 110-volt")
Out Of Stock
Brand: MinoSaver
Model: #6A
#6A - Enclosed fan cooled, thermal protected continuous duty motor. 4” x 9” epoxy coated basket. Hard rubber aerating chamber. Great for troughs and storage tanks. Remarkably smooth and quiet in operation. This Aerator has a smaller width than the #5. For 250 gal. tanks. Wt.: 8 lbs. 8FT cordOil ever..
$250.00
Brand: MinoSaver
Model: MS-Blade6A
Replacement #6A blade, also known as a paddle. Affix to the
appropriate #6A shaft to make a complete "prop and shaft". Designed for
the Minnow-Saver #6A Agitator/Aerator (110-volt)...
$15.00